The 5 Best Desoldering Stations Reviews and Buying Guide

Within the electronics DIY community, a desoldering station is categorized under the “pro”-section. A key element to complete a DIY electronics workstation, a desoldering station helps in carefully removing the solder off from complicated and crucial boards and equipment without hurting the circuitry. These stations use the principle of heating the solder and vacuum in order to get the job done.

In this article today, we are going to list down some of the best and top Desoldering stations available to buy. We have curated the list based on a few key factors that you too, should consider while buying a desoldering station online.

  • Type of station: Basically, these machines are of two types, the first is a hot air rework station and the other is a desoldering station. A hot air rework station, as the name suggests, uses hot air to melt and remove the solder whereas the desoldering station uses a vacuum to heat up and suck up the solder that’s attached to the circuitry. A desoldering station is always the best choice as it is much more reliable and versatile in nature.Desoldering stations again come in two types which include lead-based and lead-free stations. More and more countries are encouraging its users to go for lead-free stations to reduce the health risks involved in lead-based soldering. But if your circuit is based off from lead-based solder, you should probably go for that one.
  • Suction Power: As desoldering stations utilize the principle of vacuum to remove solder, it is imperative that you consider the suction power of the desoldering station you pick. Larger and reliable suction power makes it easier to rely on the desoldering station even when dealing with delicate circuitry.
  • Temperature Setting: Another key important factor that you need to consider is the operational temperature range that is available on the machine. Most of the entry range and basic level desoldering machines come with a temperature setting that ranges between 300 degrees and 900 degrees centigrade. Wider temperature range enables you to use the desoldering station for not only desoldering but also for other heated removals as well. Basic systems let you with small temperature adjustments whereas more complex systems also come with temperature sensors that are built onto the tips of the guns.
  • Warranty: Given the considerable price range on these machines, it is important to have a warranty window should any of the parts fail to function due to any manufacturing defects. Most of the branded machines come with at least 1 year of manufacturers’ warranty and the higher the better.
  • Accessories: A lot of desoldering stations come with a wide range of accessories as well. Added accessories include sharp tips, broad tips, brushes, pick equipment etc., These are imperative when you are doing surgical solder removal on complex circuitry.

These are the most important considerations that you need to keep in mind while choosing a desoldering station. Now that we have cleared that up, let us jump in and review the best desoldering stations available to buy online

Best Desoldering Stations

Desoldering StationsWarrantyBuy Now
Anesty ZD-915Desoldering Station1 YearCheck On Amazon
Yihua Desoldering Station1 YearCheck On Amazon
Newacalox Desoldering Station--Check On Amazon
Aoyue 474A++ Desoldering Station--Check On Amazon
Anesty LCD Desoldering Station1 YearCheck On Amazon

5 Best Desoldering Stations Reviews

1. Anesty ZD-915 Desoldering Station

Vacuum Desoldering Station

First on our list is an Anesty Pro Digital Vacuum based desoldering station. It is highly reviewed and rated and has a US-based power cord too.

Starting off with the basics of the device, it has a pretty standard built body that has vacuum-based heating. Quick in its function, the desoldering station is designed for lead-free desoldering in particular but can be used for other DIP component’s solder clearance.

The machine comes with a 0.1 mm large tip that makes it easy to be used on even the tiniest of the circuit boards and making it a great choice on all PCB boards.

It has a single-hand operation and the suction power on the machine is very high and can easily remove any hard soldered circuits (both one-sided or two-sided soldered PCB) with great ease.

The trigger of the gun is automatically controlled through a microprocessor. The heating element is made out of PTC and the tip of the desoldering gun has a sensor which will enable you to control the temperature very accurately and very fast as well.

This machine also comes with a 1-year manufacturer’s warranty from the date of purchase and also has a 60 days money-back guarantee window. The 24 hours customer support service is a cherry on the top.

Things we liked about it:

  • Highly reviewed and rated lead-free desoldering machine
  • 0.1 mm large soldering tip makes it easy for delicate circuits as well
  • Single hand operation that can effectively remove solder from one-sided or two-sided soldering equipment.
  • Microprocessor controlled automatic trigger
  • Temperature control sensor on the tip of the gun
  • 1-year manufacturer’s warranty and a 60 days guarantee money back window with 24 hours customer support

Things we didn’t like about it:

  • None specific to mention

Buy Now From Amazon

2. Yihua Desoldering Station 

One of a kind machine, the next entry on our list is a dual purpose soldering station. The YIHUA 948 ESD Safe is an 80 watt 2 in one station that acts as both; a soldering station and also as a desoldering station as well. Here, the soldering station has a 60-watt power rating whereas the desoldering station has an 80-watt rating.

It comes in a compact body and this upgraded version of the desoldering station comes with a PID which has programmable temperature control features implanted within it. This PID has high precision to it which will speedily track down and detect and aid in real-time temperature corrections.

Simple switching mechanisms will turn the desoldering gun into a soldering gun. Whenever you need to use the gun for soldering, you simply remove the desoldering handle and connect the soldering iron handle to the holster. The device has the intelligence to identify when the device is attached and for what.

Highly user friendly and very easy to use, the device also has an intelligent auto-sleep function which will shut down the device when not being used for a while. It also comes with 1 year USA based manufacturer’s warranty from the date of purchase.

Things we liked about it:

  • Dual-purpose 2 in 1 soldering and desoldering station
  • PID based programmable temperature control features
  • Easy to use functionalities
  • 80 watts and 60 Watts rating both for the soldering and desoldering functions respectively
  • Comes with a complete set of accessories ranging from cleaning pins, filter pipes, filters, silicone pads and more.
  • Comes with a 1-year manufacturer’s warranty from the date of purchase.

Things we didn’t like about it:

  • Could have improved the build quality slightly higher

Buy Now From Amazon

3. Newacalox Desoldering Station

Newacalox Desoldering StationNext on our list is Newacalox’s desoldering station. This desoldering station uses a 858D microcontroller that quickly heats the soldering station to the set temperature within 3 to 5 seconds.

You can heat the soldering station to a maximum temperature of 500 ° C with the lowest temperature being 100 ° C. The desoldering station features a digital LED display that provides useful information including the temperature of the tool. It raises the temperature of the soldering station gradually and stabilizes the temperature to prevent thermal shock.

The memory temperature function saves you some time in setting up the required temperature every time you turn on the desoldering station. When you turn on the station, it will heat up to the temperature that you set before turning off the device.

The automatic cooling system dissipates the heat quickly and prolongs the life of the heater and heat gun. Besides, the brushless fan ensures the operation is quiet with a noise level of less than 45db. The noiseless operation ensures the desoldering station lasts for a long time.

With the help of accurate temperature control, you can safely remove BGA IC and keep the pins intact. Even blowing the PCB will not blow it. The desoldering station is more reliable and much safer. Using this desoldering station, you can solder multiple components including BGA, PLCC, CHIP, SOIC, and QFP.

Things we liked about it

  • 700 watts power rates desoldering gun
  • Comes with a temperature range between 100℃ to 500℃
  • Heats to the set temperature within 3 to 5 seconds
  • Digital LED display shows important information
  • Brushless fan ensures quiet operation and long life
  • Features a handle length of 120cm

Things we didn’t like about it

  • No mention of warranty period
  • Fumes liberate when the temperature reaches over 400℃

Buy Now From Amazon

4. Aoyue 474A++ Desoldering Station


Aoyue 474A++ Desoldering StationThe Aoyue 474A++ Desoldering Station with Vacuum Pump is fantastic for fixing electronics. It has made a huge difference and made my repairs so much easier. The construction is solid, and its compact size is convenient.  Operating at 110 volts with 80 watts of power delivers a great balance of strength and efficiency.

Using the station is easy with its user-friendly interface and large LED display. You can navigate through the settings effortlessly. Plus, the precise temperature control guarantees accurate results every single time.

The built-in vacuum pump is a standout feature. It offers high airflow, making desoldering quick and efficient. No need to struggle longer for removing components. It has built-in protection against electrical surges, and is certified for safety and ESD Safe.  This gives me peace of mind while I’m working on my repairs.

I really like the smart features it has, like the ability to calibrate digitally and adjust the sleep mode.  These add convenience and customization to my work process. The package includes everything I need: the station, a power cord, desoldering tips, cleaning tools, spare parts, and a user manual. It had everything necessary to get started right away.

Overall, my experience with the Aoyue 474A++ Desoldering Station has been fantastic.  It’s a strong and easy-to-use tool for electronic repairs. If you need a reliable and efficient desoldering solution, I highly recommend trying out this station.

Things we liked about it:

  • It handles various desoldering tasks effectively.
  • The station has a powerful 80-watt ceramic heating element and precise temperature control.
  • It comes with a strong vacuum pump for quick and efficient desoldering.
  • The station has built-in protection against electrical surges and is certified for safety.
  • It includes the station, power cord, desoldering tips, cleaning tools, spare parts, and a user manual.

Things we didn’t like about it:

  • It operates at 110 volts, so you may need an adapter in some regions.
  • The efficient vacuum pump may produce some noise during operation.

Buy Now From Amazon

5. Anesty LCD Desoldering StationAnesty Desoldering Station

For the final entry on our list, we have yet another Anesty product, in which both of these are a bit different in their operations.

Starting off with the primary function, this is a digital desoldering device that comes with a high 120-volt output. It has a hot-proof power cord and flexible tube to prevent damage and consumes around 140 watts of power while soldering. It is made for lead-free desoldering, particularly for soldering/desoldering all DIP components.

Its desoldering pump is made of a premium printed circuit ceramic heater and heat-resistant glass enhancing its durability, sturdiness, and longevity. You can use this vacuum desoldering station with high efficiency, thanks to its adjustable constant temperature (160°C to 480°C). It is quite powerful that let you heat the station quickly to its maximum range of 480°C within a minute.

In addition, the heat-resistant glass of desoldering gun is easy to disassemble, clean, and maintain. It has a single-hand operation and high suction power and you can remove any hard soldered circuits (either single or two-sided soldered PCB) quickly and easily.

Furthermore, the settings get easily switched from Celsius to Fahrenheit (as per your convenience) and its dedicated buttons let you tune up/down the temperature level. The pistol grip of the soldering gun is convenient and safe to hold, and controlled via a microprocessor.

This Anesty adjustable temperature desoldering rework station is widely applicable in the fields of electronic teaching, research, production, DIYs, or home repairs, especially in the desoldering and repairing the electronic appliances.

Anesty offers a 1-year manufacturer’s warranty on this desoldering station along with a 30-day free return guarantee from the date of its purchase.

Things we liked about it:

  • Designed for lead-free desoldering
  • Single-hand operation to remove solder from single- or two-sided soldering equipment.
  • Easy to disassemble, clean, maintain and assemble.
  • Made of premium material and has an LCD display
  • Offers a temperature range of 160°C to 480°C and an easy °C/°F
  • Backed by a 1-year manufacturer’s warranty and 30 days free return.
  • Comes with a complete set of accessories.
  • Heats up to the set temperature in less than a minute.
  • Digital LCD screen showing the operating details

Things we didn’t like about it:

  • None too specific to mention.

Buy Now From Amazon


Out of all the desoldering stations mentioned today, the Anesty desoldering station wins our list. It is highly reviewed and rated, comes with a sharp 0.1 mm tip, has a single hand operation, microprocessor-controlled trigger and comes with a 1-year manufacturer’s warranty, a great 24 hours customer support and a 60 days return window too. All of these make it one of the best desoldering stations to buy online.

While those were our picks, we would like to know about your choices. Did you like the list? Or do you have any questions regarding the entires or related to soldering? If so, feel free to write to us in the comments section below and we will write back to you as soon as possible.

Leave a Reply

Your email address will not be published. Required fields are marked *